Industrial
Do you need a metal support ring for your industrial product?
Does your ventilation design need a round, metal part to direct
airflow? Does your latest product innovation require a sturdy,
stainless steel bowl? Metal spinnings and drawn parts are
common components of many industrial products. Below are examples
of parts HMS forms for the industrial market.
U Rings
Both of these aluminum parts are components for industrial
equipment. The Hub Ring, on the left, requires precise hole
positioning on both flanges. The Housing, on the right, requires
that the opposing flanges are parallel.
 |
|
|
|
| |
|
| |
Housing |
Hub Ring |
| Diameter |
23.75" |
22.38" |
| Height |
14.00" |
03.63" |
| Material |
Aluminum |
Aluminum |
| Thickness |
0.125" |
0.090" |
| Finish |
Mill |
Brushed |
|
|
|
|
Bowl
This stainless steel part is used by municipalities to divert
storm water run-off. After forming the part, HMS spot welds
a stainless steel handle to the center area and affixes a
rubber gasket around the flange. The completed assembly is
etched to assist the municipalities with identification.
|
|
|
|
| |
|
| Diameter |
23.25" |
|
| Height |
07.13" |
|
| Material |
Stainless |
|
| Thickness |
0.048" |
|
| Finish |
Mill |
|
|
|
|
|
L-J Rings
These stainless steel parts are the internal support structure
for industrial valve seats. The L-J Rings are covered with
various rubbers to accommodate different field applications.
The unique hole patterns address U.S. vs. overseas mounting
requirements.
|
|
|
|
| |
|
| Diameter |
7.25-59" |
| Height |
0.810-1.865" |
| Material |
Stainless |
| Thickness |
.060-.075" |
| Finish |
Mill |
|
|
|
|
Cover
This aluminum part is a shroud for a small turbine engine.
This shape is commonly referred to as a "donut".
Spinning is an excellent manufacturing process for this type
of shape.
|
|
|
|
| |
| |
| Diameter |
4.267" |
|
| Height |
1.300" |
|
| Material |
Aluminum |
|
| Thickness |
0.040" |
|
| Finish |
Brushed |
|
|
|
|
|
End Caps
This small stainless steel part is fabricated with various
hole patterns. The basic pan shape is drawn. The alternative
hole patterns are punched per customer requirements.
|
|
|
|
| |
|
| Diameter |
4.00" |
| Height |
0.75" |
| Material |
.Stainless |
| Thickness |
0.048" |
| Finish |
Mill |
|
|
|
| |
|
